prikaz prve stranice dokumenta Characterization of Ladle Furnace Slag from Carbon Steel Production as a Potential Adsorbent
  Preuzmi
PDF 1.93 MB
Znanstveni rad - Izvorni znanstveni rad
Characterization of Ladle Furnace Slag from Carbon Steel Production as a Potential Adsorbent
Advances in Materials Science and Engineering, 2013 (2013); 1-6. https://doi.org/10.1155/2013/198240
Rađenović, Ankica; Malina, Jadranka; Sofilić, Tahir

Citirajte ovaj rad

Rađenović, A., Malina, J. i Sofilić, T. (2013). Characterization of Ladle Furnace Slag from Carbon Steel Production as a Potential Adsorbent. Advances in Materials Science and Engineering, 2013., 1-6. doi: 10.1155/2013/198240

Rađenović, Ankica, et al. "Characterization of Ladle Furnace Slag from Carbon Steel Production as a Potential Adsorbent." Advances in Materials Science and Engineering, vol. 2013, 2013, str. 1-6. https://doi.org/10.1155/2013/198240

Rađenović, Ankica, Jadranka Malina i Tahir Sofilić. "Characterization of Ladle Furnace Slag from Carbon Steel Production as a Potential Adsorbent." Advances in Materials Science and Engineering 2013 (2013): 1-6. https://doi.org/10.1155/2013/198240

Rađenović, A., Malina, J. i Sofilić, T. (2013) 'Characterization of Ladle Furnace Slag from Carbon Steel Production as a Potential Adsorbent', Advances in Materials Science and Engineering, 2013, str. 1-6. doi: 10.1155/2013/198240

Rađenović A, Malina J, Sofilić T. Characterization of Ladle Furnace Slag from Carbon Steel Production as a Potential Adsorbent. Advances in Materials Science and Engineering [Internet]. 2013. [pristupljeno 04.12.2024.];2013:1-6. doi: 10.1155/2013/198240

A. Rađenović, J. Malina i T. Sofilić, "Characterization of Ladle Furnace Slag from Carbon Steel Production as a Potential Adsorbent", Advances in Materials Science and Engineering, vol. 2013, str. 1-6, 2013. [Online]. Dostupno na: https://urn.nsk.hr/urn:nbn:hr:115:101483. [Citirano: 04.12.2024.]

Za citiranje koristite ovu mrežnu adresu: https://urn.nsk.hr/urn:nbn:hr:115:101483
Prijavite se u repozitorij kako biste mogli spremiti objekt u svoju listu.
Podaci o radu
Naslov (engleski)Characterization of Ladle Furnace Slag from Carbon Steel Production as a Potential Adsorbent
AutorAnkica Rađenović
AutorJadranka Malina
AutorTahir Sofilić
Autorova ustanovaSveučilište u Zagrebu
Metalurški fakultet
Znanstveno / umjetničko
područje, polje i grana		TEHNIČKE ZNANOSTI
Metalurgija
Sažetak (engleski)
A promising type of steel slag for applications is the ladle furnace (LF) slag, which is also known as the basic slag, the reducing slag, the white slag, and the secondary refining slag. The LF slag is a byproduct from further refining molten steel after coming out of a basic oxygen furnace (BOF) or an electric arc furnace (EAF). The use of the LF slag in further applications requires knowledge of its characteristics. The LF slag characterization in this paper has been performed using the following analytical methods: chemical analysis by energy dispersive spectrometry (EDS), mineralogical composition by X-ray diffraction (XRD), surface area properties by the Brunauer-Emmett-Teller (BET) and the Barrett-Joyner-Halenda (BJH) methods, surface chemistry by infrared absorption (FTIR) spectroscopy, and morphological analysis by scanning electron microscopy (SEM). The results showed that the main compounds are calcium, silicon, magnesium, and aluminium oxides, and calcium silicates under their various allotropic forms are the major compounds in the LF slag. Surface area properties have shown that the LF slag is a mesoporous material with relatively great BET surface area. The ladle furnace slag is a nonhazardous industrial waste because the ecotoxicity evaluation by its eluate has shown that the LF slag does not contain constituents which might in any way affect the environment harmfully.
Ključne riječi (engleski)
Jezikengleski
Vrsta publikacijeZnanstveni rad - Izvorni znanstveni rad
Status objaveObjavljen
Vrsta recenzijeRecenziran - međunarodna recenzija
Verzija publikacijeObjavljena verzija rada (izdavačev PDF)
Naslov časopisaAdvances in Materials Science and Engineering
Brojčani podacivol. 2013, str. 1-6, 198240
p-ISSN1687-8434
e-ISSN1687-8442
DOIhttps://doi.org/10.1155/2013/198240
URN:NBNurn:nbn:hr:115:101483
Datum objave publikacije2013
URL dokumentahttp://www.hindawi.com/journals/amse/2013/198240/
Vrsta resursaTekst
Prava pristupaOtvoreni pristup
Uvjeti korištenjaIkona licence Zaštićeno autorskim pravom.
Datum i vrijeme pohrane2017-03-14 13:00:03