Properties of continuously casted Cu-Al alloy

Kožuh, Stjepan; Džomba, Vlado; Holjevac Grgurić, Tamara; Jandrlić, Ivan; Kosec, Borut; Gojić, Mirko

Scientific paper - Original scientific paper

Properties of continuously casted Cu-Al alloy

In: Proceedings Book 17th International Foundrymen Conference. / Dolić, Natalija; Zovko Brodarac, Zdenka; Begić Hadžipašić, Anita (Ed.). Sisak: Sveučilište u Zagrebu Metalurški fakultet, 2018. pp. 292-302. urn:nbn:hr:115:022103

Kožuh, Stjepan; Džomba, Vlado; Holjevac Grgurić, Tamara; Jandrlić, Ivan; Kosec, Borut; Gojić, Mirko

Cite this document

APA 6th Edition

Kožuh, S., Džomba, V., Holjevac Grgurić, T., Jandrlić, I., Kosec, B. & Gojić, M. (2018). Properties of continuously casted Cu-Al alloy. In N. Dolić, (Ed.), Z. Zovko Brodarac, (Ed.), A. Begić Hadžipašić, (Ed.), Proceedings Book 17th International Foundrymen Conference (pp. 292-302). Sisak: Sveučilište u Zagrebu Metalurški fakultet. Retrieved from https://urn.nsk.hr/urn:nbn:hr:115:022103

MLA 8th Edition

Kožuh, Stjepan, et al. "Properties of continuously casted Cu-Al alloy." Proceedings Book 17th International Foundrymen Conference, edited by Natalija Dolić, edited by Zdenka Zovko Brodarac, edited by Anita Begić Hadžipašić, Sveučilište u Zagrebu Metalurški fakultet, 2018, pp. 292-302. https://urn.nsk.hr/urn:nbn:hr:115:022103

Chicago 17th Edition

Kožuh, Stjepan, Vlado Džomba, Tamara Holjevac Grgurić, Ivan Jandrlić, Borut Kosec and Mirko Gojić. "Properties of continuously casted Cu-Al alloy." In Proceedings Book 17th International Foundrymen Conference, 292-302. Sisak: Sveučilište u Zagrebu Metalurški fakultet, 2018. Accessed 2024 October 21. https://urn.nsk.hr/urn:nbn:hr:115:022103

Harvard

Kožuh, S., et al. (2018) 'Properties of continuously casted Cu-Al alloy', in Dolić, N. (ed.), Zovko Brodarac, Z. (ed.), Begić Hadžipašić, A. (ed.), Proceedings Book 17th International Foundrymen Conference, Sveučilište u Zagrebu Metalurški fakultet, Sisak, pp. 292-302. Available at: https://urn.nsk.hr/urn:nbn:hr:115:022103 (Accessed 21 October 2024)

Vancouver

Kožuh S, Džomba V, Holjevac Grgurić T, Jandrlić I, Kosec B, Gojić M. Properties of continuously casted Cu-Al alloy. In: N. Dolić, ed., Z. Zovko Brodarac, ed., A. Begić Hadžipašić, ed. Proceedings Book 17th International Foundrymen Conference. Sisak: Sveučilište u Zagrebu Metalurški fakultet; 2018. Pp. 292-302. [cited 2024 October 21] Available at: https://urn.nsk.hr/urn:nbn:hr:115:022103

IEEE

S. Kožuh, V. Džomba, T. Holjevac Grgurić, I. Jandrlić, B. Kosec and M. Gojić, "Properties of continuously casted Cu-Al alloy", Proceedings Book 17th International Foundrymen Conference, N. Dolić, Z. Zovko Brodarac and A. Begić Hadžipašić, Eds. Sisak: Sveučilište u Zagrebu Metalurški fakultet, 2018. [Online] Available at: https://urn.nsk.hr/urn:nbn:hr:115:022103 [Accessed: 21 October 2024]

Cite this item: https://urn.nsk.hr/urn:nbn:hr:115:022103

Please login to the repository to save this object to your list.

Metadata

Title (english)	Properties of continuously casted Cu-Al alloy
Author	Stjepan Kožuh
Author	Vlado Džomba
Author	Tamara Holjevac Grgurić
Author	Ivan Jandrlić
Author	Borut Kosec
Author	Mirko Gojić
Editor	Natalija Dolić
Editor	Zdenka Zovko Brodarac
Editor	Anita Begić Hadžipašić
Author's institution	University of Zagreb Faculty of Metallurgy (Department of Physical Metallurgy) (Laboratory of Materials Development and Application)
Scientific / art field, discipline and subdiscipline	TECHNICAL SCIENCES Metallurgy Physical Metallurgy
Abstract (english)	In this work are shown properties of continuously casted Cu – 9.1Al alloy before and after heat treatment. The continuously cast cylindrical bar with 8 mm diameter was produced using the device for the vertical continuous casting which is connected with the vacuum induction furnace. Heat treatment was consisted of annealing at 900 °C/30 minutes and water quenching. Microstructural analysis was performed by optical microscopy (OM), scanning electron microscopy (SEM) equipped by device for energy dispersive spectroscopy (EDS) and using differential scanning calorimeter (DSC). Also, hardness and mechanical properties were measured. EDS analysis confirmed that as-cast state of Cu – 9.1Al alloy is successfully done and alloy with homogeneous composition was produced. Optical and scanning electron microscopy showed existence of dual-phase α+β microstructure, which keeps after heat treatment but with certain sporadic changes of α - phase shape. DSC analysis on all samples presented one endothermic change of the heat flow during the heating, which probably represents α→β transformation and one exothermic change of the heat flow during the cooling which probably represents β→α transformation. The effect of heat treatment on the hardness and yield strength values is insignificant, while the tensile strength decreases with annealing.
Keywords (english)
Language	english
Publication type	Scientific paper - Original scientific paper
Publication status	Published
Peer review	Peer review - international
Publication version	Published version
Publication title	Proceedings Book 17th International Foundrymen Conference
Numbering	pp. 292-302
ISBN	978-953-7082-31-4
URN:NBN	urn:nbn:hr:115:022103
Publication	2018
Conference	Title: Hi-tech casting solution and knowledge based engineering Location: Opatija, Croatia Organizer: Sveučilište u Zagrebu Metalurški fakultet Start date: 2018-05-16 End date: 2018-05-18 Assembly type: Lecture
Type of resource	Text
Publisher	Sveučilište u Zagrebu Metalurški fakultet
Publishing place	Sisak
Access conditions	Open access
Terms of use
Created on	2024-04-30 09:55:38