prikaz prve stranice dokumenta Influence of Niobium Content on Strain Amount in Lüders Bands in Niobium Microalloyed Steel
Rad nije dostupan
Znanstveni rad - Izvorni znanstveni rad
Influence of Niobium Content on Strain Amount in Lüders Bands in Niobium Microalloyed Steel
Metals and Materials International, 26 (2019), 2; 179-187. https://doi.org/10.1007/s12540-019-00336-w
Brlić, Tin; Rešković, Stoja; Jandrlić, Ivan

Citirajte ovaj rad

Brlić, T., Rešković, S. i Jandrlić, I. (2019). Influence of Niobium Content on Strain Amount in Lüders Bands in Niobium Microalloyed Steel. Metals and Materials International, 26. (2), 179-187. doi: 10.1007/s12540-019-00336-w

Brlić, Tin, et al. "Influence of Niobium Content on Strain Amount in Lüders Bands in Niobium Microalloyed Steel." Metals and Materials International, vol. 26, br. 2, 2019, str. 179-187. https://doi.org/10.1007/s12540-019-00336-w

Brlić, Tin, Stoja Rešković i Ivan Jandrlić. "Influence of Niobium Content on Strain Amount in Lüders Bands in Niobium Microalloyed Steel." Metals and Materials International 26, br. 2 (2019): 179-187. https://doi.org/10.1007/s12540-019-00336-w

Brlić, T., Rešković, S. i Jandrlić, I. (2019) 'Influence of Niobium Content on Strain Amount in Lüders Bands in Niobium Microalloyed Steel', Metals and Materials International, 26(2), str. 179-187. doi: 10.1007/s12540-019-00336-w

Brlić T, Rešković S, Jandrlić I. Influence of Niobium Content on Strain Amount in Lüders Bands in Niobium Microalloyed Steel. Metals and Materials International [Internet]. 28.06.2019. [pristupljeno 08.05.2024.];26(2):179-187. doi: 10.1007/s12540-019-00336-w

T. Brlić, S. Rešković i I. Jandrlić, "Influence of Niobium Content on Strain Amount in Lüders Bands in Niobium Microalloyed Steel", Metals and Materials International, vol. 26, br. 2, str. 179-187, Lipanj 2019. [Online]. Dostupno na: https://urn.nsk.hr/urn:nbn:hr:115:997824. [Citirano: 08.05.2024.]

Za citiranje koristite ovu mrežnu adresu: https://urn.nsk.hr/urn:nbn:hr:115:997824
Prijavite se u repozitorij kako biste mogli spremiti objekt u svoju listu.
Podaci o radu
Naslov (engleski)Influence of Niobium Content on Strain Amount in Lüders Bands in Niobium Microalloyed Steel
AutorTin Brlić
AutorStoja Rešković
AutorIvan Jandrlić
Autorova ustanovaSveučilište u Zagrebu
Metalurški fakultet
Znanstveno / umjetničko
područje, polje i grana		TEHNIČKE ZNANOSTI
Metalurgija
Sažetak (engleski)
In this paper, the influence of niobium content on strain amounts in various areas of Lüders bands propagation was investigated. The tests were simultaneously performed by a static tensile test and a digital image correlation in microalloyed steel with the same base chemical composition but with different addition of 0.035% and 0.06% of niobium. Strain changes were determined by a qualitative and quantitative analysis using a digital image correlation in the area of maximum strain amount behind the Lüders band front (position 1), on the Lüders band front (position 2) and in front of the Lüders band front (position 3). Different deformation behavior of Lüders bands was found in the examined samples with different addition of microalloying element niobium. The area behind the Lüders band front (position 1) showed the highest strain amounts in relation to the other two examined areas. The steel with 0.035% of niobium indicates higher strain amounts in the area of maximum strain behind the Lüders band front (position 1) compared to the steel with 0.06% of niobium which is associated with dislocation density and grain size. This difference is lower on the Lüders band front (position 2) and in front of the Lüders band front (position 3). There were no significant changes in the strain amount with the change of niobium content.
Ključne riječi (engleski)
Jezikengleski
Vrsta publikacijeZnanstveni rad - Izvorni znanstveni rad
Status objaveObjavljen
Vrsta recenzijeRecenziran - međunarodna recenzija
Verzija publikacijeObjavljena verzija rada (izdavačev PDF)
Naslov časopisaMetals and Materials International
Brojčani podacivol. 26, br. 2, str. 179-187
p-ISSN1598-9623
e-ISSN2005-4149
DOIhttps://doi.org/10.1007/s12540-019-00336-w
URN:NBNurn:nbn:hr:115:997824
Datum objave publikacije2019-06-28
ProjektŠifra: IP-2016-06-1270
Naziv (hrvatski): Istraživanja početka plastičnog toka metala kod hladne deformacije
Kratica: MFSRIP062016
Voditelj: Stoja Rešković
Pravna nadležnost: Hrvatska
Financijer: Hrvatska zaklada za znanost
Linija financiranja: Research Projects
URL dokumentahttp://link.springer.com/10.1007/s12540-019-00336-w
Vrsta resursaTekst
Prava pristupaZatvoreni pristup
Uvjeti korištenjaIkona licence Zaštićeno autorskim pravom.
Datum i vrijeme pohrane2024-05-04 15:34:39