prikaz prve stranice dokumenta Microstructure and microhardness of Cu-Al-Mn-Zr alloys before and after heat treatment
  Preuzmi
PDF 3.09 MB
Znanstveni rad - Izvorni znanstveni rad
Microstructure and microhardness of Cu-Al-Mn-Zr alloys before and after heat treatment
U: Proceedings Book 19th International Foundrymen Conference. / Dolić, Natalija; Zovko Brodarac, Zdenka; Brajčinović, Sandra (ur.). Sisak: Sveučilište u Zagrebu Metalurški fakultet, 2021. str. 362-371. urn:nbn:hr:115:141679
Kožuh, Stjepan; Ivanić, Ivana; Oraščanin, Semir; Nagode, Aleš; Vrsalović, Ladislav

Citirajte ovaj rad

Kožuh, S., Ivanić, I., Oraščanin, S., Nagode, A. i Vrsalović, L. (2021). Microstructure and microhardness of Cu-Al-Mn-Zr alloys before and after heat treatment. U N. Dolić, (Ur.), Z. Zovko Brodarac, (Ur.), S. Brajčinović, (Ur.), Proceedings Book 19th International Foundrymen Conference (str. 362-371). Sisak: Sveučilište u Zagrebu Metalurški fakultet. Preuzeto s https://urn.nsk.hr/urn:nbn:hr:115:141679

Kožuh, Stjepan, et al. "Microstructure and microhardness of Cu-Al-Mn-Zr alloys before and after heat treatment." Proceedings Book 19th International Foundrymen Conference, Ur. Natalija Dolić, Ur. Zdenka Zovko Brodarac, Ur. Sandra Brajčinović, Sveučilište u Zagrebu Metalurški fakultet, 2021, str. 362-371. https://urn.nsk.hr/urn:nbn:hr:115:141679

Kožuh, Stjepan, Ivana Ivanić, Semir Oraščanin, Aleš Nagode i Ladislav Vrsalović. "Microstructure and microhardness of Cu-Al-Mn-Zr alloys before and after heat treatment." U Proceedings Book 19th International Foundrymen Conference, 362-371. Sisak: Sveučilište u Zagrebu Metalurški fakultet, 2021. Citirano 10.05.2024.. https://urn.nsk.hr/urn:nbn:hr:115:141679

Kožuh, S., et al. (2021) 'Microstructure and microhardness of Cu-Al-Mn-Zr alloys before and after heat treatment', u Dolić, N. (ur.), Zovko Brodarac, Z. (ur.), Brajčinović, S. (ur.), Proceedings Book 19th International Foundrymen Conference, Sveučilište u Zagrebu Metalurški fakultet, Sisak, str. 362-371. Preuzeto s: https://urn.nsk.hr/urn:nbn:hr:115:141679 (Datum pristupa: 10.05.2024.)

Kožuh S, Ivanić I, Oraščanin S, Nagode A, Vrsalović L. Microstructure and microhardness of Cu-Al-Mn-Zr alloys before and after heat treatment. U: N. Dolić, ur., Z. Zovko Brodarac, ur., S. Brajčinović, ur. Proceedings Book 19th International Foundrymen Conference. Sisak: Sveučilište u Zagrebu Metalurški fakultet; 2021. Str. 362-371. [pristupljeno 10.05.2024.] Dostupno na: https://urn.nsk.hr/urn:nbn:hr:115:141679

S. Kožuh, I. Ivanić, S. Oraščanin, A. Nagode i L. Vrsalović, "Microstructure and microhardness of Cu-Al-Mn-Zr alloys before and after heat treatment", Proceedings Book 19th International Foundrymen Conference, N. Dolić, Z. Zovko Brodarac i S. Brajčinović, Ur. Sisak: Sveučilište u Zagrebu Metalurški fakultet, 2021. [Online] Dostupno na: https://urn.nsk.hr/urn:nbn:hr:115:141679 [Citirano: 10.05.2024.]

Za citiranje koristite ovu mrežnu adresu: https://urn.nsk.hr/urn:nbn:hr:115:141679
Prijavite se u repozitorij kako biste mogli spremiti objekt u svoju listu.
Podaci o radu
Naslov (engleski)Microstructure and microhardness of Cu-Al-Mn-Zr alloys before and after heat treatment
AutorStjepan Kožuh
AutorIvana Ivanić
AutorSemir Oraščanin
AutorAleš Nagode
AutorLadislav Vrsalović
UrednikNatalija Dolić
UrednikZdenka Zovko Brodarac
UrednikSandra Brajčinović
Autorova ustanovaSveučilište u Zagrebu
Metalurški fakultet
(Zavod za fizičku metalurgiju)
(Laboratorij za razvoj i primjenu materijala)
Znanstveno / umjetničko
područje, polje i grana		TEHNIČKE ZNANOSTI
Metalurgija
Fizička metalurgija
Sažetak (engleski)
In this work preliminary results of the heat treatment effect on microstructure and microhardness of Cu-8.5Al-10Mn-(0.25-1.00)Zr alloys were presented. Ingots (8 mm in diameter and 15 mm in length) were produced by melting and casting process. Production of investigated alloys was performed in laboratory electric arc furnace. Melting was carried out using the heat produced by electric arc and by a water-cooled, specially constructed copper anode that also served as a casting mould. The samples were analysed in as-cast state and after heat treatment at 900 °C/15 min/water. Microstructural analysis was performed by optical microscopy (OM), scanning electron microscopy (SEM) equipped by device for energy dispersive spectroscopy (EDS). Preliminary optical microscopy analysis of investigated alloys confirmed that microstructure was consisted of martensite only in Cu-8.5Al-10Mn-0.25Zr alloy in as-cast and heat treated state. SEM analysis show the start of martensite formation in some places at all investigated alloys in both, as-cast and heat treated state. A microhardness measurement was performed by Vickers method. Microhardness values of Cu-8.5Al-10Mn-(0.25-1.00)Zr alloys were up to 215.8 HV1 after casting and up to 224.5 HV1 after heat treatment.
Ključne riječi (engleski)
Jezikengleski
Vrsta publikacijeZnanstveni rad - Izvorni znanstveni rad
Status objaveObjavljen
Vrsta recenzijeRecenziran - međunarodna recenzija
Verzija publikacijeObjavljena verzija rada (izdavačev PDF)
Naslov zbornikaProceedings Book 19th International Foundrymen Conference
Brojčani podacistr. 362-371
ISBN978-953-7082-39-0
URN:NBNurn:nbn:hr:115:141679
Datum objave publikacije2021
SkupNaziv: Humans - Valuable Resource for Foundry Industry Development
Lokacija: Split, Hrvatska
Organizator: Sveučilište u Zagrebu Metalurški fakultet
Datum početka: 2021-06-16
Datum završetka: 2021-06-18
Vrsta izlaganja: Predavanje
Vrsta resursaTekst
IzdavačSveučilište u Zagrebu Metalurški fakultet
Mjesto izdavanjaSisak
Prava pristupaOtvoreni pristup
Uvjeti korištenjaIkona licence Zaštićeno autorskim pravom.
Datum i vrijeme pohrane2024-04-30 09:41:35