prikaz prve stranice dokumenta PLC Effect at Different Types of Loading During Static Tensile Testing of Aluminium Alloys
  Preuzmi
PDF 1.1 MB
Znanstveni rad - Izvorni znanstveni rad
PLC Effect at Different Types of Loading During Static Tensile Testing of Aluminium Alloys
Acta Mechanica Slovaca, 27 (2023), 1; 34-38. https://doi.org/10.21496/ams.2023.021
Jandrlić, Ivan; Brlić, Tin; Mrkobrada, Lorena; Vučenović, Milica

Citirajte ovaj rad

Jandrlić, I., Brlić, T., Mrkobrada, L. i Vučenović, M. (2023). PLC Effect at Different Types of Loading During Static Tensile Testing of Aluminium Alloys. Acta Mechanica Slovaca, 27. (1), 34-38. doi: 10.21496/ams.2023.021

Jandrlić, Ivan, et al. "PLC Effect at Different Types of Loading During Static Tensile Testing of Aluminium Alloys." Acta Mechanica Slovaca, vol. 27, br. 1, 2023, str. 34-38. https://doi.org/10.21496/ams.2023.021

Jandrlić, Ivan, Tin Brlić, Lorena Mrkobrada i Milica Vučenović. "PLC Effect at Different Types of Loading During Static Tensile Testing of Aluminium Alloys." Acta Mechanica Slovaca 27, br. 1 (2023): 34-38. https://doi.org/10.21496/ams.2023.021

Jandrlić, I., et al. (2023) 'PLC Effect at Different Types of Loading During Static Tensile Testing of Aluminium Alloys', Acta Mechanica Slovaca, 27(1), str. 34-38. doi: 10.21496/ams.2023.021

Jandrlić I, Brlić T, Mrkobrada L, Vučenović M. PLC Effect at Different Types of Loading During Static Tensile Testing of Aluminium Alloys. Acta Mechanica Slovaca [Internet]. 24.03.2023. [pristupljeno 14.11.2024.];27(1):34-38. doi: 10.21496/ams.2023.021

I. Jandrlić, T. Brlić, L. Mrkobrada i M. Vučenović, "PLC Effect at Different Types of Loading During Static Tensile Testing of Aluminium Alloys", Acta Mechanica Slovaca, vol. 27, br. 1, str. 34-38, Ožujak 2023. [Online]. Dostupno na: https://urn.nsk.hr/urn:nbn:hr:115:098208. [Citirano: 14.11.2024.]

Za citiranje koristite ovu mrežnu adresu: https://urn.nsk.hr/urn:nbn:hr:115:098208
Prijavite se u repozitorij kako biste mogli spremiti objekt u svoju listu.
Podaci o radu
Naslov (engleski)PLC Effect at Different Types of Loading During Static Tensile Testing of Aluminium Alloys
AutorIvan Jandrlić
AutorTin Brlić
AutorLorena Mrkobrada
AutorMilica Vučenović
Autorova ustanovaSveučilište u Zagrebu
Metalurški fakultet
(Zavod za mehaničku metalurgiju)
(Laboratorij za obradu kovina deformiranjem)
Znanstveno / umjetničko
područje, polje i grana		TEHNIČKE ZNANOSTI
Metalurgija
Sažetak (engleski)
Aluminium and aluminium alloys are indispensable materials nowadays, widely used in various constructions. It is known that some aluminium alloys, such as Al-Mg, show inhomogeneous, localized deformation phenomena at certain temperatures and strain rates. This is known in the literature as the appearance of Portevin-Le Chatelier lines, or short the PLCeffect. The Portevin-Le Chatelier effect contributes to the reduction of material ductility and leaves surface defects on the final products. The study of this phenomenon was carried out using a static tensile test and the digital image correlation method. The influence of using a constant increase of stress on the phenomenon itself was studied in comparison to the classical control of the testing machine with a constant crosshead speed. The results of the study show that the phenomenon persists regardless of the type of control and no significant changes were observed at used testing parameters. Regardless of the deformation parameters, PLC lines form throughout the whole duration of the plastic deformation until the specimen breaks.
Ključne riječi (engleski)
Jezikengleski
Vrsta publikacijeZnanstveni rad - Izvorni znanstveni rad
Status objaveObjavljen
Vrsta recenzijeRecenziran - međunarodna recenzija
Verzija publikacijeObjavljena verzija rada (izdavačev PDF)
Naslov časopisaActa Mechanica Slovaca
Brojčani podacivol. 27, br. 1, str. 34-38
p-ISSN1335-2393
e-ISSN1339-3073
DOIhttps://doi.org/10.21496/ams.2023.021
URN:NBNurn:nbn:hr:115:098208
Datum objave publikacije2023-03-24
ProjektŠifra: KK.01.1.1.02.0020
Naziv (hrvatski): Centar za ljevarstvo - SIMET
Naziv (engleski): Center for casting - SIMET
Kratica: SIMET
Voditelj: Zdenka Zovko Brodarac
Pravna nadležnost: Hrvatska
Financijer: Europska komisija
Linija financiranja: European Regional Development Fund
ProjektŠifra: KK.01.1.1.02.0022
Naziv (hrvatski): Virtulab – Integrirani laboratorij za primarne i sekundarne sirovine
Kratica: Virtulab
Pravna nadležnost: Hrvatska
Financijer: Europska komisija
Linija financiranja: European Regional Development Fund
Vrsta resursaTekst
Prava pristupaOtvoreni pristup
Uvjeti korištenjaIkona licence Zaštićeno autorskim pravom.
Datum i vrijeme pohrane2024-04-25 10:08:02