prikaz prve stranice dokumenta Investigation of Laser-Welded Co-Cr Dental Alloys by Microscopy and Mechanical Testing
  Preuzmi
PDF 2.58 MB
Znanstveni rad - Izvorni znanstveni rad
Investigation of Laser-Welded Co-Cr Dental Alloys by Microscopy and Mechanical Testing
Metals, 13 (2023), 7; 1323. https://doi.org/10.3390/met13071323
Carek, Andreja; Slokar Benić, Ljerka; Buković, Dino; Šlaj, Martina

Citirajte ovaj rad

Carek, A., Slokar Benić, Lj., Buković, D. i Šlaj, M. (2023). Investigation of Laser-Welded Co-Cr Dental Alloys by Microscopy and Mechanical Testing. Metals, 13. (7). doi: 10.3390/met13071323

Carek, Andreja, et al. "Investigation of Laser-Welded Co-Cr Dental Alloys by Microscopy and Mechanical Testing." Metals, vol. 13, br. 7, 2023. https://doi.org/10.3390/met13071323

Carek, Andreja, Ljerka Slokar Benić, Dino Buković i Martina Šlaj. "Investigation of Laser-Welded Co-Cr Dental Alloys by Microscopy and Mechanical Testing." Metals 13, br. 7 (2023). https://doi.org/10.3390/met13071323

Carek, A., et al. (2023) 'Investigation of Laser-Welded Co-Cr Dental Alloys by Microscopy and Mechanical Testing', Metals, 13(7). doi: 10.3390/met13071323

Carek A, Slokar Benić Lj, Buković D, Šlaj M. Investigation of Laser-Welded Co-Cr Dental Alloys by Microscopy and Mechanical Testing. Metals [Internet]. 2023. [pristupljeno 14.11.2024.];13(7). doi: 10.3390/met13071323

A. Carek, Lj. Slokar Benić, D. Buković i M. Šlaj, "Investigation of Laser-Welded Co-Cr Dental Alloys by Microscopy and Mechanical Testing", Metals, vol. 13, br. 7, 2023. [Online]. Dostupno na: https://urn.nsk.hr/urn:nbn:hr:115:555802. [Citirano: 14.11.2024.]

Za citiranje koristite ovu mrežnu adresu: https://urn.nsk.hr/urn:nbn:hr:115:555802
Prijavite se u repozitorij kako biste mogli spremiti objekt u svoju listu.
Podaci o radu
Naslov (engleski)Investigation of Laser-Welded Co-Cr Dental Alloys by Microscopy and Mechanical Testing
AutorAndreja Carek
AutorLjerka Slokar Benić
AutorDino Buković
AutorMartina Šlaj
Autorova ustanovaSveučilište u Zagrebu
Metalurški fakultet
Autorova ustanovaSveučilište u Zagrebu
Stomatološki fakultet
Znanstveno / umjetničko
područje, polje i grana		TEHNIČKE ZNANOSTI
Metalurgija
Sažetak (engleski)
In order to improve the hold and function of dentures for the patient, various prostheses made of metal, mostly metal alloys, are used every day in dental practise. Cobalt-chromium alloys are usually the first choice because they have very good mechanical properties and satisfactory clinical conditions. Nowadays, laser welding is increasingly used in dental practise due to its numerous advantages over other technologies. In this work, therefore, six commercially available Co-Cr alloys were investigated. Three of them are used for metal-ceramic work, two for denture frameworks and one is suitable for both applications. They were joined by laser welding and subsequently analysed microscopically. Their mechanical properties were determined and statistically evaluated. The microhardness of the laser-welded alloys is in the range of 282–465 MPa in the weld zone and between 283 and 435 MPa in the heat-affected zone. The flexural strength of the laser-welded alloys is lower than the control group, but an alloy for the metal-ceramic work (I-BOND NF) shows very similar value. Furthermore, this alloy, together with two other metal-ceramic alloys, survived a maximum of cycles in dynamic tests. It was found that the laser method can be used for joining Co-Cr alloys while ensuring appropriate parameters that guarantee the quality of the dental work.
Ključne riječi (engleski)
Jezikengleski
Vrsta publikacijeZnanstveni rad - Izvorni znanstveni rad
Status objaveObjavljen
Vrsta recenzijeRecenziran - međunarodna recenzija
Verzija publikacijeObjavljena verzija rada (izdavačev PDF)
Naslov časopisaMetals
Brojčani podacivol. 13, br. 7, 1323
BPC2051,20 EUR
e-ISSN2075-4701
DOIhttps://doi.org/10.3390/met13071323
URN:NBNurn:nbn:hr:115:555802
Datum objave publikacije2023
Vrsta resursaTekst
Prava pristupaOtvoreni pristup
Uvjeti korištenjaIkona licence Imenovanje 4.0 međunarodna (CC BY 4.0)
Datum i vrijeme pohrane2024-04-23 11:26:56