prikaz prve stranice dokumenta Microscopic and Mechanical Characterization of Co-Cr Dental Alloys Joined by the TIG Welding Process
  Preuzmi
PDF 1.57 MB
Znanstveni rad - Izvorni znanstveni rad
Microscopic and Mechanical Characterization of Co-Cr Dental Alloys Joined by the TIG Welding Process
Materials, 16 (2023), 10; 3890. https://doi.org/10.3390/ma16103890
Carek, Andreja; Slokar Benić, Ljerka; Bubalo, Vatroslav; Kosović, Nika

Citirajte ovaj rad

Carek, A., Slokar Benić, Lj., Bubalo, V. i Kosović, N. (2023). Microscopic and Mechanical Characterization of Co-Cr Dental Alloys Joined by the TIG Welding Process. Materials, 16. (10). doi: 10.3390/ma16103890

Carek, Andreja, et al. "Microscopic and Mechanical Characterization of Co-Cr Dental Alloys Joined by the TIG Welding Process." Materials, vol. 16, br. 10, 2023. https://doi.org/10.3390/ma16103890

Carek, Andreja, Ljerka Slokar Benić, Vatroslav Bubalo i Nika Kosović. "Microscopic and Mechanical Characterization of Co-Cr Dental Alloys Joined by the TIG Welding Process." Materials 16, br. 10 (2023). https://doi.org/10.3390/ma16103890

Carek, A., et al. (2023) 'Microscopic and Mechanical Characterization of Co-Cr Dental Alloys Joined by the TIG Welding Process', Materials, 16(10). doi: 10.3390/ma16103890

Carek A, Slokar Benić Lj, Bubalo V, Kosović N. Microscopic and Mechanical Characterization of Co-Cr Dental Alloys Joined by the TIG Welding Process. Materials [Internet]. 22.05.2023. [pristupljeno 18.11.2024.];16(10). doi: 10.3390/ma16103890

A. Carek, Lj. Slokar Benić, V. Bubalo i N. Kosović, "Microscopic and Mechanical Characterization of Co-Cr Dental Alloys Joined by the TIG Welding Process", Materials, vol. 16, br. 10, Svibanj 2023. [Online]. Dostupno na: https://urn.nsk.hr/urn:nbn:hr:115:055150. [Citirano: 18.11.2024.]

Za citiranje koristite ovu mrežnu adresu: https://urn.nsk.hr/urn:nbn:hr:115:055150
Prijavite se u repozitorij kako biste mogli spremiti objekt u svoju listu.
Podaci o radu
Naslov (engleski)Microscopic and Mechanical Characterization of Co-Cr Dental Alloys Joined by the TIG Welding Process
AutorAndreja Carek
AutorLjerka Slokar Benić
AutorVatroslav Bubalo
AutorNika Kosović
Autorova ustanova(Klinička bolnica Dubrava)
Autorova ustanovaSveučilište u Zagrebu
Metalurški fakultet
Autorova ustanovaSveučilište u Zagrebu
Stomatološki fakultet
Znanstveno / umjetničko
područje, polje i grana		TEHNIČKE ZNANOSTI
Metalurgija
Sažetak (engleski)
Due to their good mechanical and other properties, cobalt-chromium alloys (Co-Cr) are often used in prosthetic therapy. The metal structures of prosthetic works can be damaged and break, and depending on the extent of the damage, they can be re-joined. Tungsten inert gas welding (TIG) produces a high-quality weld with a composition very close to that of the base material. Therefore, in this work, six commercially available Co-Cr dental alloys were joined by TIG welding, and their mechanical properties were evaluated to determine the quality of the TIG process as a technology for joining metallic dental materials and the suitability of the Co-Cr alloys used for TIG welding. Microscopic observations were made for this purpose. Microhardness was measured using the Vickers method. The flexural strength was determined on a mechanical testing machine. The dynamic tests were carried out on a universal testing machine. The mechanical properties were determined for welded and non-welded specimens, and the results were statistically evaluated. The results show the correlation between the investigated mechanical properties and the process TIG. Indeed, characteristics of the welds have an effect on the measured properties. Considering all the results obtained, the TIG—welded I—BOND NF and Wisil M alloys showed the cleanest and most uniform weld and, accordingly, satisfactory mechanical properties, highlighting that they withstood the maximum number of cycles under dynamic load.
Jezikengleski
Vrsta publikacijeZnanstveni rad - Izvorni znanstveni rad
Status objaveObjavljen
Vrsta recenzijeRecenziran - međunarodna recenzija
Verzija publikacijeObjavljena verzija rada (izdavačev PDF)
Naslov časopisaMaterials
Brojčani podacivol. 16, br. 10, 3890
e-ISSN1996-1944
DOIhttps://doi.org/10.3390/ma16103890
URN:NBNurn:nbn:hr:115:055150
Datum objave publikacije2023-05-22
URL dokumentahttps://www.mdpi.com/1996-1944/16/10/3890
Vrsta resursaTekst
Prava pristupaOtvoreni pristup
Uvjeti korištenjaIkona licence Zaštićeno autorskim pravom.
Datum i vrijeme pohrane2023-07-05 11:03:50