prikaz prve stranice dokumenta The Effect of Heat Treatment on Damping Capacity and Mechanical Properties of CuAlNi Shape Memory Alloy
  Preuzmi
PDF 5.37 MB
Znanstveni rad - Izvorni znanstveni rad
The Effect of Heat Treatment on Damping Capacity and Mechanical Properties of CuAlNi Shape Memory Alloy
Materials, 15 (2022), 5; 1825. https://doi.org/10.3390/ma15051825
Ivanić, Ivana; Kožuh, Stjepan; Holjevac Grgurić, Tamara; Vrsalović, Ladislav; Gojić, Mirko

Citirajte ovaj rad

Ivanić, I., Kožuh, S., Holjevac Grgurić, T., Vrsalović, L. i Gojić, M. (2022). The Effect of Heat Treatment on Damping Capacity and Mechanical Properties of CuAlNi Shape Memory Alloy. Materials, 15. (5). doi: 10.3390/ma15051825

Ivanić, Ivana, et al. "The Effect of Heat Treatment on Damping Capacity and Mechanical Properties of CuAlNi Shape Memory Alloy." Materials, vol. 15, br. 5, 2022. https://doi.org/10.3390/ma15051825

Ivanić, Ivana, Stjepan Kožuh, Tamara Holjevac Grgurić, Ladislav Vrsalović i Mirko Gojić. "The Effect of Heat Treatment on Damping Capacity and Mechanical Properties of CuAlNi Shape Memory Alloy." Materials 15, br. 5 (2022). https://doi.org/10.3390/ma15051825

Ivanić, I., et al. (2022) 'The Effect of Heat Treatment on Damping Capacity and Mechanical Properties of CuAlNi Shape Memory Alloy', Materials, 15(5). doi: 10.3390/ma15051825

Ivanić I, Kožuh S, Holjevac Grgurić T, Vrsalović L, Gojić M. The Effect of Heat Treatment on Damping Capacity and Mechanical Properties of CuAlNi Shape Memory Alloy. Materials [Internet]. 2022. [pristupljeno 23.12.2024.];15(5). doi: 10.3390/ma15051825

I. Ivanić, S. Kožuh, T. Holjevac Grgurić, L. Vrsalović i M. Gojić, "The Effect of Heat Treatment on Damping Capacity and Mechanical Properties of CuAlNi Shape Memory Alloy", Materials, vol. 15, br. 5, 2022. [Online]. Dostupno na: https://urn.nsk.hr/urn:nbn:hr:115:975349. [Citirano: 23.12.2024.]

Za citiranje koristite ovu mrežnu adresu: https://urn.nsk.hr/urn:nbn:hr:115:975349
Prijavite se u repozitorij kako biste mogli spremiti objekt u svoju listu.
Podaci o radu
Naslov (engleski)The Effect of Heat Treatment on Damping Capacity and Mechanical Properties of CuAlNi Shape Memory Alloy
AutorIvana Ivanić
MBZ: 335063
AutorStjepan Kožuh
MBZ: 248081
AutorTamara Holjevac Grgurić
MBZ: 241081
AutorLadislav Vrsalović
MBZ: 237626
AutorMirko Gojić
MBZ: 63390
Autorova ustanovaHrvatsko katoličko sveučilište
Autorova ustanovaSveučilište u Splitu
Kemijsko-tehnološki fakultet
Autorova ustanovaSveučilište u Zagrebu
Metalurški fakultet
Znanstveno / umjetničko
područje, polje i grana		TEHNIČKE ZNANOSTI
Metalurgija
Sažetak (engleski)
This paper discusses the effect of different heat treatment procedures on the microstructural characteristics, damping capacities, and mechanical properties of CuAlNi shape memory alloys (SMA). The investigation was performed on samples in the as-cast state and heat treated states (solution annealing at 885 °C/60’/H2O and after tempering at 300 °C/60’/H2O). The microstructure of the samples was examined by light microscopy (LM) and scanning electron microscopy (SEM) equipped with a device for energy dispersive spectrometry (EDS) analysis. Light and scanning electron microscopy showed martensitic microstructure in all investigated samples. However, the changes in microstructure due to heat treatment by the presence of two types of martensite phases (β1’ and γ1’) influenced alloy damping and mechanical properties by enhancing alloy damping characteristics. Heat treatment procedure reduced the alloys’ mechanical properties and increased hardness of the alloy. Fractographic analysis of the alloy showed a transgranular type of fracture in samples after casting. After solution annealing, two types of fracture mechanisms can be noticed, transgranular and intergranular, while in tempered samples, mostly an intergranular type of fracture exists.
Ključne riječi (engleski)
Jezikengleski
Vrsta publikacijeZnanstveni rad - Izvorni znanstveni rad
Status objaveObjavljen
Vrsta recenzijeRecenziran - međunarodna recenzija
Verzija publikacijeObjavljena verzija rada (izdavačev PDF)
Naslov časopisaMaterials
Brojčani podacivol. 15, br. 5, 1825
e-ISSN1996-1944
DOIhttps://doi.org/10.3390/ma15051825
URN:NBNurn:nbn:hr:115:975349
Datum objave publikacije2022
ProjektŠifra: IP-2014-09-3405
Naziv (hrvatski): Dizajniranje mikrostrukture i funkcionalnih svojstava legura s prisjetljivosti oblika na bazi bakra
Naziv (engleski): Design of Microstructure and Functional Properties of Cu-based Shape Memory Alloys
Kratica: DMFP-CuSMA
Voditelj: Mirko Gojić
Pravna nadležnost: Hrvatska
Financijer: HRZZ
Linija financiranja: IP
URL dokumentahttp://bib.irb.hr/1182627
Vrsta resursaTekst
Prava pristupaOtvoreni pristup
Uvjeti korištenjaIkona licence Zaštićeno autorskim pravom.
Datum i vrijeme pohrane2022-03-02 07:35:41