prikaz prve stranice dokumenta The effect of annealing time on microstructure and impact energy of stainless steel AISI 316L
  Preuzmi
PDF 2.49 MB
Znanstveni rad - Izvorni znanstveni rad
The effect of annealing time on microstructure and impact energy of stainless steel AISI 316L
U: Proceedings Book 18th International Foundrymen Conference. / Dolić, Natalija; Zovko Brodarac, Zdenka; Begić Hadžipašić, Anita (ur.). Sisak: University of Zagreb Faculty of Metallurgy, 2019. str. 275-287. urn:nbn:hr:115:914398
Kožuh, Stjepan; Pavičić, Katarina; Ivanić, Ivana; Bizjak, Milan; Gojić, Mirko

Citirajte ovaj rad

Kožuh, S., Pavičić, K., Ivanić, I., Bizjak, M. i Gojić, M. (2019). The effect of annealing time on microstructure and impact energy of stainless steel AISI 316L. U N. Dolić, (Ur.), Z. Zovko Brodarac, (Ur.), A. Begić Hadžipašić, (Ur.), Proceedings Book 18th International Foundrymen Conference (str. 275-287). Sisak: University of Zagreb Faculty of Metallurgy. Preuzeto s https://urn.nsk.hr/urn:nbn:hr:115:914398

Kožuh, Stjepan, et al. "The effect of annealing time on microstructure and impact energy of stainless steel AISI 316L." Proceedings Book 18th International Foundrymen Conference, Ur. Natalija Dolić, Ur. Zdenka Zovko Brodarac, Ur. Anita Begić Hadžipašić, University of Zagreb Faculty of Metallurgy, 2019, str. 275-287. https://urn.nsk.hr/urn:nbn:hr:115:914398

Kožuh, Stjepan, Katarina Pavičić, Ivana Ivanić, Milan Bizjak i Mirko Gojić. "The effect of annealing time on microstructure and impact energy of stainless steel AISI 316L." U Proceedings Book 18th International Foundrymen Conference, 275-287. Sisak: University of Zagreb Faculty of Metallurgy, 2019. Citirano 02.12.2024.. https://urn.nsk.hr/urn:nbn:hr:115:914398

Kožuh, S., et al. (2019) 'The effect of annealing time on microstructure and impact energy of stainless steel AISI 316L', u Dolić, N. (ur.), Zovko Brodarac, Z. (ur.), Begić Hadžipašić, A. (ur.), Proceedings Book 18th International Foundrymen Conference, University of Zagreb Faculty of Metallurgy, Sisak, str. 275-287. Preuzeto s: https://urn.nsk.hr/urn:nbn:hr:115:914398 (Datum pristupa: 02.12.2024.)

Kožuh S, Pavičić K, Ivanić I, Bizjak M, Gojić M. The effect of annealing time on microstructure and impact energy of stainless steel AISI 316L. U: N. Dolić, ur., Z. Zovko Brodarac, ur., A. Begić Hadžipašić, ur. Proceedings Book 18th International Foundrymen Conference. Sisak: University of Zagreb Faculty of Metallurgy; 2019. Str. 275-287. [pristupljeno 02.12.2024.] Dostupno na: https://urn.nsk.hr/urn:nbn:hr:115:914398

S. Kožuh, K. Pavičić, I. Ivanić, M. Bizjak i M. Gojić, "The effect of annealing time on microstructure and impact energy of stainless steel AISI 316L", Proceedings Book 18th International Foundrymen Conference, N. Dolić, Z. Zovko Brodarac i A. Begić Hadžipašić, Ur. Sisak: University of Zagreb Faculty of Metallurgy, 2019. [Online] Dostupno na: https://urn.nsk.hr/urn:nbn:hr:115:914398 [Citirano: 02.12.2024.]

Za citiranje koristite ovu mrežnu adresu: https://urn.nsk.hr/urn:nbn:hr:115:914398
Prijavite se u repozitorij kako biste mogli spremiti objekt u svoju listu.
Podaci o radu
Naslov (engleski)The effect of annealing time on microstructure and impact energy of stainless steel AISI 316L
AutorStjepan Kožuh
MBZ: 248081
AutorKatarina Pavičić
AutorIvana Ivanić
MBZ: 335063
AutorMilan Bizjak
AutorMirko Gojić
MBZ: 63390
UrednikNatalija Dolić
UrednikZdenka Zovko Brodarac
UrednikAnita Begić Hadžipašić
Autorova ustanovaSveučilište u Zagrebu
Metalurški fakultet
Znanstveno / umjetničko
područje, polje i grana		TEHNIČKE ZNANOSTI
Metalurgija
Sažetak (engleski)
In this work the results of microstructural analysis and impact energy testing of austenitic stainless steel AISI 316L were carried out. Investigations were performed before and after annealing at 850 °C. Annealing time in this investigation varied from 30 to 90 minutes. After annealing, the samples were cooled in room temperature air. Microstructural analysis of initial rolled and different annealed states was performed by optical microscopy (OM) and scanning electron microscopy (SEM) equipped with device for energy dispersive spectroscopy (EDS). Impact tests were performed on Charpy V-notch specimens at room temperature. Initial rolled state of investigated steel showed the presence of typical elongated polygonal grains austenite and delta ferrite while annealed states showed the presence and evolution of sigma phase in microstructure. Impact energy value of initial rolled state was 260 J and by increasing annealing time it decreases.
Ključne riječi (engleski)
Jezikengleski
Vrsta publikacijeZnanstveni rad - Izvorni znanstveni rad
Status objaveObjavljen
Vrsta recenzijeRecenziran - međunarodna recenzija
Verzija publikacijeObjavljena verzija rada (izdavačev PDF)
Naslov zbornikaProceedings Book 18th International Foundrymen Conference
Brojčani podacistr. 275-287
ISBN978-953-7082-34-5
URN:NBNurn:nbn:hr:115:914398
Datum objave publikacije2019
ProjektŠifra: GOJIC-CRO-SLO 2018/2019
Naziv (hrvatski): Analiza prijelomnih površina mikrolegiranih čelika
Voditelj: Mirko Gojić
Pravna nadležnost: Hrvatska
Financijer: MZO
Linija financiranja: Nema
SkupNaziv: Coexistence of material science and sustainable technology in economic growth
Lokacija: Sisak, Hrvatska
Datum početka: 2019-05-15
Datum završetka: 2019-05-17
Vrsta izlaganja: Postersko izlaganje
URL dokumentahttp://bib.irb.hr/1002352
Vrsta resursaTekst
IzdavačUniversity of Zagreb Faculty of Metallurgy
Mjesto izdavanjaSisak
Prava pristupaOtvoreni pristup
Uvjeti korištenjaIkona licence Zaštićeno autorskim pravom.
Datum i vrijeme pohrane2019-07-10 08:12:55