prikaz prve stranice dokumenta The Application of a Factorial Experiment with Repeated Measurements in the Investigation of Parameters Influencing the Properties of Niobium Microalloyed Cold Drawn Welded Steel Tubes
Rad nije dostupan
Znanstveni rad - Izvorni znanstveni rad
The Application of a Factorial Experiment with Repeated Measurements in the Investigation of Parameters Influencing the Properties of Niobium Microalloyed Cold Drawn Welded Steel Tubes
Transactions of FAMENA, 43 (2020), 4; 17-26. https://doi.org/10.21278/TOF.43402
Rešković, Stoja; Grizelj, Branko; Brlić, Tin; Balenović, Marijan

Citirajte ovaj rad

Rešković, S., Grizelj, B., Brlić, T. i Balenović, M. (2020). The Application of a Factorial Experiment with Repeated Measurements in the Investigation of Parameters Influencing the Properties of Niobium Microalloyed Cold Drawn Welded Steel Tubes. Transactions of FAMENA, 43. (4), 17-26. doi: 10.21278/TOF.43402

Rešković, Stoja, et al. "The Application of a Factorial Experiment with Repeated Measurements in the Investigation of Parameters Influencing the Properties of Niobium Microalloyed Cold Drawn Welded Steel Tubes." Transactions of FAMENA, vol. 43, br. 4, 2020, str. 17-26. https://doi.org/10.21278/TOF.43402

Rešković, Stoja, Branko Grizelj, Tin Brlić i Marijan Balenović. "The Application of a Factorial Experiment with Repeated Measurements in the Investigation of Parameters Influencing the Properties of Niobium Microalloyed Cold Drawn Welded Steel Tubes." Transactions of FAMENA 43, br. 4 (2020): 17-26. https://doi.org/10.21278/TOF.43402

Rešković, S., et al. (2020) 'The Application of a Factorial Experiment with Repeated Measurements in the Investigation of Parameters Influencing the Properties of Niobium Microalloyed Cold Drawn Welded Steel Tubes', Transactions of FAMENA, 43(4), str. 17-26. doi: 10.21278/TOF.43402

Rešković S, Grizelj B, Brlić T, Balenović M. The Application of a Factorial Experiment with Repeated Measurements in the Investigation of Parameters Influencing the Properties of Niobium Microalloyed Cold Drawn Welded Steel Tubes. Transactions of FAMENA [Internet]. 2020. [pristupljeno 14.11.2024.];43(4):17-26. doi: 10.21278/TOF.43402

S. Rešković, B. Grizelj, T. Brlić i M. Balenović, "The Application of a Factorial Experiment with Repeated Measurements in the Investigation of Parameters Influencing the Properties of Niobium Microalloyed Cold Drawn Welded Steel Tubes", Transactions of FAMENA, vol. 43, br. 4, str. 17-26, 2020. [Online]. Dostupno na: https://urn.nsk.hr/urn:nbn:hr:115:569448. [Citirano: 14.11.2024.]

Za citiranje koristite ovu mrežnu adresu: https://urn.nsk.hr/urn:nbn:hr:115:569448
Prijavite se u repozitorij kako biste mogli spremiti objekt u svoju listu.
Podaci o radu
Naslov (engleski)The Application of a Factorial Experiment with Repeated Measurements in the Investigation of Parameters Influencing the Properties of Niobium Microalloyed Cold Drawn Welded Steel Tubes
AutorStoja Rešković
AutorBranko Grizelj
AutorTin Brlić
AutorMarijan Balenović
Autorova ustanovaSveučilište u Slavonskom Brodu
(Strojarski fakultet u Slavonskom Brodu)
Autorova ustanovaSveučilište u Zagrebu
Metalurški fakultet
Znanstveno / umjetničko
područje, polje i grana		TEHNIČKE ZNANOSTI
Metalurgija
Sažetak (engleski)
It has been observed that inhomogeneous deformations occur at the beginning of the plastic material flow during the cold drawing of welded tubes and after the proportionality limit Rp has been reached. Therefore, it is important to determine the most influential factor at the beginning of the plastic material flow. Tests were carried out on a welded joint and on the base material. The study was performed on two steels with different contents of the microalloying element niobium. Tubes were drawn with two different degrees of reduction. The factorial experiment consisting of three factors at two levels 2^3 with repeated measurements showed that the degree of reduction has the greatest influence on the proportionality limit.
Ključne riječi (engleski)
Jezikengleski
Vrsta publikacijeZnanstveni rad - Izvorni znanstveni rad
Status objaveObjavljen
Vrsta recenzijeRecenziran - međunarodna recenzija
Verzija publikacijeObjavljena verzija rada (izdavačev PDF)
Naslov časopisaTransactions of FAMENA
Brojčani podacivol. 43, br. 4, str. 17-26
p-ISSN1333-1124
e-ISSN1849-1391
DOIhttps://doi.org/10.21278/TOF.43402
URN:NBNurn:nbn:hr:115:569448
Datum objave publikacije2020
ProjektŠifra: IP 2016-06-1270
Naziv (hrvatski): Istraživanja početka plastičnog toka metala kod hladne deformacije
Kratica: MFSRIP062016
Voditelj: Stoja Rešković
Pravna nadležnost: Hrvatska
Financijer: HRZZ
URL dokumentahttps://hrcak.srce.hr/234308
Vrsta resursaTekst
Prava pristupaZatvoreni pristup
Uvjeti korištenjaIkona licence Zaštićeno autorskim pravom.
Datum i vrijeme pohrane2024-05-04 14:30:13