prikaz prve stranice dokumenta Effect of heat treatment on microstructure and thermal properties of Cu-based shape memory ribbons
  Preuzmi
PDF 2.39 MB
Znanstveni rad - Izvorni znanstveni rad
Effect of heat treatment on microstructure and thermal properties of Cu-based shape memory ribbons
Kemija u industriji : Časopis kemičara i kemijskih inženjera Hrvatske, 71 (2022), 9-10; 591-600. https://doi.org/10.15255/KUI.2022.011
Kožuh, Stjepan; Ivanić, Ivana; Holjevac Grgurić, Tamara; Gojić, Mirko

Citirajte ovaj rad

Kožuh, S., Ivanić, I., Holjevac Grgurić, T. i Gojić, M. (2022). Effect of heat treatment on microstructure and thermal properties of Cu-based shape memory ribbons. Kemija u industriji : Časopis kemičara i kemijskih inženjera Hrvatske, 71. (9-10), 591-600. doi: 10.15255/KUI.2022.011

Kožuh, Stjepan, et al. "Effect of heat treatment on microstructure and thermal properties of Cu-based shape memory ribbons." Kemija u industriji : Časopis kemičara i kemijskih inženjera Hrvatske, vol. 71, br. 9-10, 2022, str. 591-600. https://doi.org/10.15255/KUI.2022.011

Kožuh, Stjepan, Ivana Ivanić, Tamara Holjevac Grgurić i Mirko Gojić. "Effect of heat treatment on microstructure and thermal properties of Cu-based shape memory ribbons." Kemija u industriji : Časopis kemičara i kemijskih inženjera Hrvatske 71, br. 9-10 (2022): 591-600. https://doi.org/10.15255/KUI.2022.011

Kožuh, S., et al. (2022) 'Effect of heat treatment on microstructure and thermal properties of Cu-based shape memory ribbons', Kemija u industriji : Časopis kemičara i kemijskih inženjera Hrvatske, 71(9-10), str. 591-600. doi: 10.15255/KUI.2022.011

Kožuh S, Ivanić I, Holjevac Grgurić T, Gojić M. Effect of heat treatment on microstructure and thermal properties of Cu-based shape memory ribbons. Kemija u industriji : Časopis kemičara i kemijskih inženjera Hrvatske [Internet]. 2022. [pristupljeno 09.12.2024.];71(9-10):591-600. doi: 10.15255/KUI.2022.011

S. Kožuh, I. Ivanić, T. Holjevac Grgurić i M. Gojić, "Effect of heat treatment on microstructure and thermal properties of Cu-based shape memory ribbons", Kemija u industriji : Časopis kemičara i kemijskih inženjera Hrvatske, vol. 71, br. 9-10, str. 591-600, 2022. [Online]. Dostupno na: https://urn.nsk.hr/urn:nbn:hr:115:190654. [Citirano: 09.12.2024.]

Za citiranje koristite ovu mrežnu adresu: https://urn.nsk.hr/urn:nbn:hr:115:190654
Prijavite se u repozitorij kako biste mogli spremiti objekt u svoju listu.
Podaci o radu
Naslov (engleski)Effect of heat treatment on microstructure and thermal properties of Cu-based shape memory ribbons
AutorStjepan Kožuh
AutorIvana Ivanić
AutorTamara Holjevac Grgurić
AutorMirko Gojić
Autorova ustanovaSveučilište u Zagrebu
Metalurški fakultet
(Zavod za fizičku metalurgiju)
(Laboratorij za razvoj i primjenu materijala)
Znanstveno / umjetničko
područje, polje i grana		TEHNIČKE ZNANOSTI
Metalurgija
Sažetak (engleski)
The aim in this work was to investigate the change in microstructure, phase transformation temperatures, and thermal properties due to the quenching of the investigated Cu-Al-Mn and Cu-Al-Mn-Ti alloys in ribbons form. This paper presents the results of microstructure analysis and thermal properties of Cu-Al-Mn and Cu-Al-Mn-Ti shape memory alloys produced in form of ribbons by melt spinning technique. The microstructural analysis was carried out before and after quenching. After casting of the investigated alloys annealing at 900 °C for 30 min was performed, followed by water quenching. The microstructural analysis was carried out by optical and scanning electron microscopy equipped with an energy dispersive spectrometer and by X-ray diffractometer. Thermodynamic calculation of a ternary Cu-Al-Mn system in equilibrium condition was performed using Thermo-Calc 5 software. Phase transformation temperatures were determined by differential scanning calorimetry and by electrical resistance measuring. The results of microstructural analysis show the presence of martensite microstructures before and after quenching in the Cu-Al-Mn alloy, while in the Cu-Al-Mn-Ti alloy martensite microstructure exists only after quenching. Phase transformation temperatures were decreased after quenching and titanium addition.
Ključne riječi (engleski)
Jezikengleski
Vrsta publikacijeZnanstveni rad - Izvorni znanstveni rad
Status objaveObjavljen
Vrsta recenzijeRecenziran - međunarodna recenzija
Verzija publikacijeObjavljena verzija rada (izdavačev PDF)
Naslov časopisaKemija u industriji : Časopis kemičara i kemijskih inženjera Hrvatske
Brojčani podacivol. 71, br. 9-10, str. 591-600
p-ISSN0022-9830
e-ISSN1334-9090
DOIhttps://doi.org/10.15255/KUI.2022.011
URN:NBNurn:nbn:hr:115:190654
Datum objave publikacije2022
Vrsta resursaTekst
Prava pristupaOtvoreni pristup
Uvjeti korištenjaIkona licence Zaštićeno autorskim pravom.
Datum i vrijeme pohrane2024-04-29 07:40:16