prikaz prve stranice dokumenta Modeling of stress distribution on the basis of the measured values of strain and temperature changes
  Preuzmi
PDF 622.54 KB
Znanstveni rad - Izvorni znanstveni rad
Modeling of stress distribution on the basis of the measured values of strain and temperature changes
AIMS Materials Science, 6 (2019), 4; 601-609. https://doi.org/10.3934/matersci.2019.4.601
Jandrlić, Ivan; Rešković, Stoja; Ćurčija, Dušan; Lazić, Ladislav; Brlić, Tin

Citirajte ovaj rad

Jandrlić, I., Rešković, S., Ćurčija, D., Lazić, L. i Brlić, T. (2019). Modeling of stress distribution on the basis of the measured values of strain and temperature changes. AIMS Materials Science, 6. (4), 601-609. doi: 10.3934/matersci.2019.4.601

Jandrlić, Ivan, et al. "Modeling of stress distribution on the basis of the measured values of strain and temperature changes." AIMS Materials Science, vol. 6, br. 4, 2019, str. 601-609. https://doi.org/10.3934/matersci.2019.4.601

Jandrlić, Ivan, Stoja Rešković, Dušan Ćurčija, Ladislav Lazić i Tin Brlić. "Modeling of stress distribution on the basis of the measured values of strain and temperature changes." AIMS Materials Science 6, br. 4 (2019): 601-609. https://doi.org/10.3934/matersci.2019.4.601

Jandrlić, I., et al. (2019) 'Modeling of stress distribution on the basis of the measured values of strain and temperature changes', AIMS Materials Science, 6(4), str. 601-609. doi: 10.3934/matersci.2019.4.601

Jandrlić I, Rešković S, Ćurčija D, Lazić L, Brlić T. Modeling of stress distribution on the basis of the measured values of strain and temperature changes. AIMS Materials Science [Internet]. 05.07.2019. [pristupljeno 10.05.2024.];6(4):601-609. doi: 10.3934/matersci.2019.4.601

I. Jandrlić, S. Rešković, D. Ćurčija, L. Lazić i T. Brlić, "Modeling of stress distribution on the basis of the measured values of strain and temperature changes", AIMS Materials Science, vol. 6, br. 4, str. 601-609, Srpanj 2019. [Online]. Dostupno na: https://urn.nsk.hr/urn:nbn:hr:115:377045. [Citirano: 10.05.2024.]

Za citiranje koristite ovu mrežnu adresu: https://urn.nsk.hr/urn:nbn:hr:115:377045
Prijavite se u repozitorij kako biste mogli spremiti objekt u svoju listu.
Podaci o radu
Naslov (engleski)Modeling of stress distribution on the basis of the measured values of strain and temperature changes
AutorIvan Jandrlić
AutorStoja Rešković
AutorDušan Ćurčija
MBZ: 4741
AutorLadislav Lazić
AutorTin Brlić
Autorova ustanovaSveučilište u Zagrebu
Metalurški fakultet
(Zavod za mehaničku metalurgiju)
Znanstveno / umjetničko
područje, polje i grana		TEHNIČKE ZNANOSTI
Metalurgija
Mehanička metalurgija
Sažetak (engleski)
This paper proposes a new mathematical model for calculation of stresses on the basis of experimentally measured values of strains and temperature changes for niobium microalloyed steel. Construction of model was done using a multiple regression analysis of the measured values of temperature change, deformation and stresses at four different stretching rates. All investigations were conducted on samples from the niobium microalloyed steel, using thermography and digital image correlation during static tensile testing. Constructed model was tested and validated on the experimentally obtained results. Model showed a good agreement of calculated stress values with experimentally obtained ones.
Ključne riječi (engleski)
Jezikengleski
Vrsta publikacijeZnanstveni rad - Izvorni znanstveni rad
Status objaveObjavljen
Vrsta recenzijeRecenziran - međunarodna recenzija
Verzija publikacijeObjavljena verzija rada (izdavačev PDF)
Naslov časopisaAIMS Materials Science
Brojčani podacivol. 6, br. 4, str. 601-609
e-ISSN2372-0484
DOIhttps://doi.org/10.3934/matersci.2019.4.601
URN:NBNurn:nbn:hr:115:377045
Datum objave publikacije2019-07-05
ProjektŠifra: IP-2016-06-1270
Naziv (hrvatski): Istraživanja početka plastičnog toka metala kod hladne deformacije
Kratica: MFSRIP062016
Voditelj: Stoja Rešković
Pravna nadležnost: Hrvatska
Financijer: HRZZ
Linija financiranja: IP
Vrsta resursaTekst
Prava pristupaOtvoreni pristup
Uvjeti korištenjaIkona licence Zaštićeno autorskim pravom.
Datum i vrijeme pohrane2024-04-23 12:22:29