prikaz prve stranice dokumenta Technological development of the casting process for the thin-walled gray cast iron
  Preuzmi
PDF 438.96 KB
Znanstveni rad - Izvorni znanstveni rad
Technological development of the casting process for the thin-walled gray cast iron
U: 53rd International October Conference on Mining and Metallurgy Proceedings. / Kostov, Ana; Ljubujev, Milenko (ur.). Bor: Mining and Metallurgy Institute Bor, 2022. str. 131-134. urn:nbn:hr:115:241027
Kozina, Franjo; Zovko Brodarac, Zdenka; Zeljko, Luka; Tubić Bulat, Barbara; Mrvar, Primož; Mahmutović, Almir; Zeljko, Snježana

Citirajte ovaj rad

Kozina, F., Zovko Brodarac, Z., Zeljko, L., Tubić Bulat, B., Mrvar, P., Mahmutović, A. i Zeljko, S. (2022). Technological development of the casting process for the thin-walled gray cast iron. U A. Kostov, (Ur.), M. Ljubujev, (Ur.), 53rd International October Conference on Mining and Metallurgy Proceedings (str. 131-134). Bor: Mining and Metallurgy Institute Bor. Preuzeto s https://urn.nsk.hr/urn:nbn:hr:115:241027

Kozina, Franjo, et al. "Technological development of the casting process for the thin-walled gray cast iron." 53rd International October Conference on Mining and Metallurgy Proceedings, Ur. Ana Kostov, Ur. Milenko Ljubujev, Mining and Metallurgy Institute Bor, 2022, str. 131-134. https://urn.nsk.hr/urn:nbn:hr:115:241027

Kozina, Franjo, Zdenka Zovko Brodarac, Luka Zeljko, Barbara Tubić Bulat, Primož Mrvar, Almir Mahmutović i Snježana Zeljko. "Technological development of the casting process for the thin-walled gray cast iron." U 53rd International October Conference on Mining and Metallurgy Proceedings, 131-134. Bor: Mining and Metallurgy Institute Bor, 2022. Citirano 21.04.2024.. https://urn.nsk.hr/urn:nbn:hr:115:241027

Kozina, F., et al. (2022) 'Technological development of the casting process for the thin-walled gray cast iron', u Kostov, A. (ur.), Ljubujev, M. (ur.), 53rd International October Conference on Mining and Metallurgy Proceedings, Mining and Metallurgy Institute Bor, Bor, str. 131-134. Preuzeto s: https://urn.nsk.hr/urn:nbn:hr:115:241027 (Datum pristupa: 21.04.2024.)

Kozina F, Zovko Brodarac Z, Zeljko L, Tubić Bulat B, Mrvar P, Mahmutović A, i sur.. Technological development of the casting process for the thin-walled gray cast iron. U: A. Kostov, ur., M. Ljubujev, ur. 53rd International October Conference on Mining and Metallurgy Proceedings. Bor: Mining and Metallurgy Institute Bor; 2022. Str. 131-134. [pristupljeno 21.04.2024.] Dostupno na: https://urn.nsk.hr/urn:nbn:hr:115:241027

F. Kozina, et al., "Technological development of the casting process for the thin-walled gray cast iron", 53rd International October Conference on Mining and Metallurgy Proceedings, A. Kostov i M. Ljubujev, Ur. Bor: Mining and Metallurgy Institute Bor, 2022. [Online] Dostupno na: https://urn.nsk.hr/urn:nbn:hr:115:241027 [Citirano: 21.04.2024.]

Za citiranje koristite ovu mrežnu adresu: https://urn.nsk.hr/urn:nbn:hr:115:241027
Prijavite se u repozitorij kako biste mogli spremiti objekt u svoju listu.
Podaci o radu
Naslov (engleski)Technological development of the casting process for the thin-walled gray cast iron
AutorFranjo Kozina
AutorZdenka Zovko Brodarac
AutorLuka Zeljko
AutorBarbara Tubić Bulat
AutorPrimož Mrvar
AutorAlmir Mahmutović
AutorSnježana Zeljko
UrednikAna Kostov
UrednikMilenko Ljubujev
Autorova ustanovaSveučilište u Zagrebu
Metalurški fakultet
(Zavod za procesnu metalurgiju)
(Laboratorij za željezo, čelik i ljevarstvo)
Znanstveno / umjetničko
područje, polje i grana		TEHNIČKE ZNANOSTI
Metalurgija
Procesna metalurgija
Sažetak (engleski)
The research was performed to optimize the casting process and geometry of the fireplace door frame casting to increase productivity and prevent the appearance of the surface casting defects. The ProCAST software support was used to optimize the vents and casting temperature. Although, the proposed optimization reduced casting time and the mass of the casting, the increase in the hot spot had a negative impact on the appearance of the burn-on. The simulation results indicated that the appearance of the surface defect could be avoided by lowering the casting temperature of the optimized version.
Ključne riječi (engleski)
Jezikengleski
Vrsta publikacijeZnanstveni rad - Izvorni znanstveni rad
Status objaveObjavljen
Vrsta recenzijeRecenziran - međunarodna recenzija
Verzija publikacijeZavršna verzija rukopisa prihvaćena za objavljivanje (postprint)
Naslov zbornika53rd International October Conference on Mining and Metallurgy Proceedings
Brojčani podacistr. 131-134
ISBN978-86-7827-052-9
URN:NBNurn:nbn:hr:115:241027
Datum objave publikacije2022-10-03
SkupNaziv: 53rd International October Conference on Mining and Metallurgy
Kratica: IOC 2022
Lokacija: Bor, Srbija
Datum početka: 2022-10-03
Datum završetka: 2022-10-05
Vrsta izlaganja: Predavanje
URL dokumentahttp://bib.irb.hr/1225213
Vrsta resursaTekst
IzdavačMining and Metallurgy Institute Bor
Mjesto izdavanjaBor
Prava pristupaOtvoreni pristup
Uvjeti korištenjaIkona licence Zaštićeno autorskim pravom.
Datum i vrijeme pohrane2022-10-24 11:52:01